|
Authorized Hewlett Packard Partner |
|
For on-site repair Toll free: 877-861-2413 |
Laserjet II Troubleshooting
|
|
|
|
|
|
Authorized Hewlett Packard Partner |
|
For on-site repair Toll free: 877-861-2413 |
Laserjet II Troubleshooting
|
|
|
|
|
|
|
The LaserJet II was introduced in March 1987, and discontinued in Jan 1991. The HP 33440A LaserJet series II printer provides 300 dots per inch resolution with a throughput of up to 8 pages per minute. Printer features include PCL Printer Language Level 4. Interfaces are RS-232-C/RS-422-A and Centronics parallel. Total memory is 512 K, user Memory is 395 K. Fonts per page is 16 maximum. Downloadable soft fonts - 32 maximum. The memory boards for the LaserJet series II have been discontinued and are no longer available through Hewlett-Packard. The part numbers for the discontinued memory cards are 33443B for 1 MB, 33444B for 2 MB, and 33445B for 4 MB. Memory boards do not increase the printers 1 KB (1,024 byte) serial I/O buffer or increase the speed of the HP LaserJet printer. Optional memory requirements: Full-page (letter-sized) 150 dpi graphics - None, Half-page (letter-sized) 300 dpi graphics - None, Full-page (letter-sized) 300 dpi graphics - 1 MB, Full-page (legal-sized) 300 dpi graphics - 1 MB. The optional memory required for the HP LaserJet printers is directly influenced by the complexity of the graphics and soft fonts being used. Text resolution with standard memory is 300 x 300 dots per inch (dpi). Graphics resolution with standard memory is 75 dpi full-page, 100 dpi full-page, 150 dpi full-page, 300 dpi half-page. First Page (after receipt of data)is less than 16 seconds. Warm-up time (depends on amount of memory) is less than 30 seconds. Duty Cycle is up to 12,000 pages. There is one standard input tray with a capacity (Regular Paper) of 200 sheets. There is one standard Output tray with a capacity face-down (correct order) of 100 sheets and a capacity face-up (inverse order) of 20 sheets. Maximum paper size is 8.5 inches x 14 inches and the minimum Paper Size is 3-7/8 inches x 7.5 inches. Physical specifications are Width - 18.0 inches, Depth (body only) - 19.0 inches, Depth (w/letter tray) - 32.1 inches, Depth (w/legal paper tray) - 34.5 inches, Height - 9.13 inches, Weight (including EP-S cartridge) - 51.0 lbs. |
| The HP LaserJet II Toner Imaging System uses the 92295A Toner Cartridge. The Toner Cartridge consists of an all-in-one consumable cartridge that prints up to 4,000 pages. |
|
|
The LaserJet IID was first introduced in Nov 1988 and discontinued in June 1991. The HP LaserJet IID printer (HP part number 33447A) provides 300 dots per resolution with a throughput of up to eight pages per minute. The major additions are dual paper bins, the ability to duplex (print on both sides), and an optional envelope feeder. Printer features are PCL Printer Language Level 4. Interfaces include RS-232-C/RS-422-A and Centronics parallel. Total Memory is 640 K, user memory is 395 K Fonts Per Page are limited only by memory. Downloadable Soft Fonts are limited only by memory. Memory boards for the HP LaserJet IID printers have been discontinued. The part numbers for the discontinued memory cards are 33443B for 1 MB, 33444B for 2 MB, and 33445B for 4 MB. Memory boards do not increase the printer's 3 x 1 KB (3,072 byte) serial and parallel I/O buffer size or increase the speed of the HP LaserJet IID printer. Optional memory requirements: Full - page (letter - sized) 150 - dpi graphics - None, Half - page (letter - sized) 300 - dpi graphics - None, Full - page (letter - sized) 300 - dpi graphics - 1 MB, Full - page (legal - sized) 300 - dpi graphics - 1 MB, Duplexing (letter-sized) 300 - dpi graphics - 2 MB, Duplexing (legal-sized) 300 - dpi graphics - 4 MB. The optional memory required for the HP LaserJet IID printers is directly influenced by the complexity of the graphics and soft fonts being used. Text resolution with standard memory is 300 x 300 dots per inch (dpi). Graphics resolution with standard memory is 75 dpi full-page, 100 dpi full-page, 150 dpi full-page, 300 dpi half-page. Performance for the printer is up to 8 pages per minute simplex and 3.7 (7.4 sides) duplex. First page after receipt of data) is less than 16 seconds. Warm-up time is less than 30 seconds. Duty Cycle is up to 16,000 pages. Paper handling includes two standard input trays with a capacity (Regular Paper) of 200 Sheets each, 400 total. There are two standard output trays with a capacity Face - down (correct order) of 100 Sheets and a capacity Face - up (inverse order) of 20 Sheets. Maximum paper size is 8.5 x 14 inches, minimum paper size is 3.87 x 7.5 inches. Physical specifications are: width - 18.0 inches, Depth (body only) - 25.0 inches, Depth (w/letter tray) - 35.0 inches, Depth (w/legal paper tray) - 37.5 inches, Height - 12.3 inches, Weight (including EP-S cartridge)74.0 lbs. |
| The HP LaserJet IID printer Toner Imaging System uses the Toner Cartridge (HP part number 92295A). The Toner Cartridge consists of an all-in-one consumable cartridge that prints up to 4,000 pages. |
|
|
The LaserJet IIp was first introduced in Oct 1989 and discontinued in oct 1991. HP LaserJet IIP Printer Introduction Price$1,495.00. The HP 33471A LaserJet IIP printer provides 300 dots per inch resolution with a throughput of up to 4 pages per minute. It has the ability to handle multiple paper sizes through its "Multi-Purpose" tray. The HP LaserJet IIP printer has PCL Printer Language Level 4. Interfaces include RS-232-C/RS-422-A and Centronics Parallel. It is possible to install a combination of up to two memory boards totaling 4 MB of optional memory: HP33474B 1 Mb Memory Board (Discontinued) and HP33475B 2 Mb Memory Board (Discontinued). Memory boards do not increase the printers 3 x 1 KB (3,072 byte) serial and parallel I/O buffer size or increase the speed of the HP LaserJet printer. Optional Memory Requirements - Full-page (letter-sized) 150 dpi graphics - None, Half-page (letter-sized) 300 dpi graphics - None, Full-page (letter-sized) 300 dpi graphics - 1 MB, Full-page (legal-sized) 300 dpi graphics - 1 MB. The optional memory required for the HP LaserJet printers is directly influenced by the complexity of the graphics and soft fonts being used. Text resolution with standard memory is 300 x 300 Dots Per Inch (DPI). Graphics resolution with standard memory 75 dpi full-page, 100 dpi full-page, 150 dpi full-page, 300 dpi half-page. Performance for the HP LaserJet IIP printer, first Page (after receipt of data)Less than 40 seconds, warm-up time is less than 60 seconds, duty cycle is up to 6,000 pages. Paper Handling for the HP LaserJet IIP printer: There is one standard input tray (MP Tray), with a capacity (Regular Paper) of 50 sheets (Regular Paper), or 5 (Envelopes). There is are two standard output trays with a capacity Face-down (correct order) of 50 sheets and a capacity Face-up (inverse order) of 20 Sheets. Maximum paper size is 8.5 inches x 14 inches and the minimum Paper Size is 3-7/8 inches x 7.5 inches. Physical specifications for the HP LaserJet IIP printer are Width - 14.0 in, Depth (body only) - 16.0 in, Depth (w/letter tray) - 16.0 in, Depth (w/legal paper tray) - 18.0 in, Height - 8.25 in, Height (w/lower cassette base) 10.25 in, Weight (including EP-L cartridge) - 25.0 lbs. |
| The LaserJet IIP Toner Imaging System uses the 92275A Toner Cartridge. The Toner Cartridge consists of an all-in-one consumable. |
| The LaserJet IIP Plus was first introduced in Sep 1991 and discontinued in May 1993. The HP C2007A LaserJet IIP Plus printer provides 300 dots per inch resolution with a throughput of up to 4 pages per minute. It has the ability to handle multiple paper sizes through its "Multi-Purpose" tray. Total memory is 512K, user memory is 395K. An individual may install a combination of up to 2 boards totaling 4 Mb of optional memory: HP33474B 1 Mb Memory Board (discontinued) and the HP33475B 2 Mb Memory Board (discontinued). Memory boards do not increase the printer's 3 x 5 Kb (15360 byte) parallel I/O buffer size or increase the speed of the HP LaserJet printer. Optional memory requirements for full-page (letter-size) 150 dpi graphics - None, half-page (letter-size) 300 dpi graphics - None, full-page (letter-size) 300 dpi graphics - 1 MB, full-page (legal-size) 300 dpi graphics - 1 MB. The optional memory required for the HP LaserJet printers is directly influenced by the complexity of the graphics and soft fonts being used. Resolution for text is 300 x 300 dots per inch (dpi), graphics resolution with standard memory is 75 dpi full page, 100 dpi full page, 150 dpi full page, 300 dpi half page. Performance for the printer is up to 4 pages per minute. First Page (after receipt of data) is less than 40 seconds, warm-up time (depends onthe amount of memory) is less than 60 seconds. Duty Cycle is up to 8000 pages. There is one standard input tray with a capacity (MP Tray - Regular Paper) of 70 Sheets, and a capacity (MP Tray - Envelopes) of 5 Envelopes. The standard output tray capacity Face-down (correct order) is 50 sheets. Optional input trays require optional lower cassette. Maximum paper size is 8 1/2 inch x 14 inch, and the minimum paper size is 3 7/8 inch x 7 1/2 inch. Physical specifications: Width - 14.0 inches, Depth (body only) - 16.0 inches, Depth (with letter or MP paper tray) - 16.0 inches, Depth (with legal tray) - 18.0 inches, Height - 8.25 inches, Height (with lower cassette base) - 10.25 inches, Weight (including EP-L cartridge) - 22.0 lbs, Weight (with lower cassette base) - 25.0 lbs. | |
| The HP LaserJet IIP Plus Toner Imaging System uses the 92275A toner cartridge. The toner cartridge consists of an all-in-one consumable cartridge that prints up to 3500 pages. |
This information is subject to change without notice and is provided "as is" with no warranty.
Skill Office Machines, Inc. shall not be liable for any incidental, special, direct, indirect or consequential damages in connection with the use of this material.
